How To Avoid A Flat Tire?

Flat tire and tire repair are part and parcel of your daily routine if you have a vehicle of your own. Tire puncture is always a terrible situation to be in for a person. Most of the times, it occurs due to any outside object that gets into the tire and creates a hole in the tire. In the case of tire puncture, the first effect is a loss of inflation pressure in the tire and if the driver carries on with the same damaged tire there are significant risks that it may blow out and cause serious injuries to the passengers. Few of most effective ways to avoid a flat tire are:

  • Keep Tires Inflated:

Keeping your tires inflated according to recommended pressure level is important so that they wear evenly and you get maximum fuel efficiency. It must be noticed that over and under inflate tires could be deadly dangerous.

  • Regular inspection:

Make it a regular habit to inspect and examine the tire regularly, try to locate tread uneven or similar other issues quickly before they tend to get worst. Regular check and balance can prevent tire flat big time.

  • Proper tire repair:

If you are seeking tire repair or replacement, make sure you consult the professionals in this regard. If the tire needs a replacement, better find that replacement tire which has more resistance to puncture and comes with higher mileage warranty.

  • Vehicle condition, alignment and maintenance:

Have a keen eye at the conditions of the vehicle, its alignment and maintenance plus all the additional factors that have an impact towards tire puncture. For example, brakes have an impact on how your tire wear so in such case, make sure the brake is finely adjusted.


  • Avoid Streets Near Construction Sites:

It might seem too mainstream thing, but has a significant effect on the tires, since most of the punctures and flat tire occur majorly due to the outside objects. So it is wise to avoid the places or roads which pose a risk to your tire.

  • Use TireCare Kit:

TireCare Kit - your tire protection

TireCare kit is comprised with the smartest tools that enable permanent sealing, non toxic, non hazardous and non corrosive functioning. Another aspect of the TireCare Kit that makes it inevitable is that it is brilliantly eco-friendly.

Cons of Using Run Flat Tire

Run flat tires are extremely facilitating for the drivers and make the drive easier and minimize the threats of any mishap. Run flat tires are the highly technology and hazard free kinds of tires that do not get flat and help the drive to keep driving until he reaches a nearby safe location or his home. Many models of latest cars are coming with built in run flat tire technology which shows that they are high in demand due to their unique selling points. However, everything has two aspects, so is the case with run flat tire, in addition to unlimited pros, it has several cons associated with it as well, like:


  1. High Costs:

In the era where people tend to look for inexpensive but quality tires, run flat tires could be around one third time more costly as compared to the conventional tires. Other than that, run flat tires are a lot more prone to replacement which is why they are an expensive option.

  1. No repair:

In the case if your run flat tire gets punctured or damaged, it simply means you will have to look for a replacement as there is no replacement available for run flat tires at the moment.

  1. Uncomfortable driving:

Run flat tire has thick sidewalls due to which the tire has less absorb shocking ability making it difficult to drive the car comfortably. Lack of smoothness is one of the major cons associated with the flat run tires.

  1. More fuel consumption:

Due to the utilization of heavier and complicated technology in the manufacturing, the run flat tires have the ability to reduce fuel economy by almost 2%.


  1. Availability issues:

Due to their specific regulation and configuration standards, at times, it could be an uphill task to find exactly what kind of run flat tires you need.



Can Run Flat Tire Be Repaired?

Tire repair and flat tire are the common practices that take place regularly. Run flat tires have countless benefits like less weight, sophistication and more driving time etc, but when it comes to their repair, there has always been a big question mark. On the one hand, some manufacturers advise that you should not repair flat run tires due to safety reasons while others have adopted certain conditions for the same purpose and if your tire is damaged, there may be chances of repair only if it fulfills the conditions like, the tire is not used when flat, damage is merely occurred on tread area and the puncture is not more than ¼ proportion.

The adequate way to get tire repaired is to cover the puncture hole from the inner side and then apply a patch on above side. Be sure to not to plug your tire because the plug repairs do not include off taking of the wheel for a professional and regulated examination or testing. And a plug is just placed and pushed into the punctured area that makes it vulnerable. So better to rely on a complete inspection and get the run flat tire’s center demount, and then follow on to check the inner and outer sides of the tire respectively and after a complete test, should a tire be ready for repair. However, if the above mentioned three conditions are ignored, then it is highly likely that the tire will have to be replaced. It is important to remember to inspect the tire on the other side of the car, so that one has a low depth, you will be at an ease to replace that as well without further damage. Experts recommend replacing all four tires simultaneously, but in case if replacing only two new tires is required, make sure that the new tires have the same size and condition as the existing tires.